eddy current inspection
- A nondestructive testing technique (NDT) that interrogates a component for surface inconsistencies and conditions such as hardness, conductivity, etc. It can only be applied to conductive materials. Eddy current testing generates small alternating magnetic fields on the surface of the component, and these magnetic fields interact with conductive components to generate small eddy currents on the surface. These currents in turn generate their own secondary alternating magnetic fields that interact with the primary fields. By analyzing the interaction, the defects and the changes in the conductivity and the permeability of the surface can be analyzed. The detection limits of the technique depend upon the surface condition of the piece under examination. It is normally not possible to detect defects that are smaller than about three times the surface roughness of the component. The detectable length of defects depends upon the integrity of the scan pattern.Eddy current which is induced in a disc moving through a nonuniform magnetic field.
Aviation dictionary. 2014.
Look at other dictionaries:
Inspection — Maintenance check of electronic equipment on a U.S. Navy aircraft. An inspection is, most generally, an organized examination or formal evaluation exercise. In engineering activities inspection involves the measurements, tests, and gauges applied … Wikipedia
Rail inspection — is the practice of examining rail tracks for flaws that could lead to catastrophic failures. According to the United States Federal Railroad Administration Office of Safety Analysis, [ [http://safetydata.fra.dot.gov/officeofsafety/ Federal… … Wikipedia
Nondestructive testing — or Non destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component or system without causing damage. The terms Nondestructive examination (NDE),… … Wikipedia
Electro Magnetic Acoustic Transducer — An Electro Magnetic Acoustic Transducer (EMAT), is a non contact inspection device that generates an ultrasonic pulse in the part or sample inspected, instead of the transducer. The waves reflected by the sample induce a varying electric current… … Wikipedia
Diving cylinder — Diving cylinders to be filled at a diving air compressor station … Wikipedia
Magnetic flux leakage — (MFL) is a magnetic method of nondestructive testing that is used to detect corrosion and pitting in steel structures, most commonly pipelines and storage tanks. The basic principle is that a powerful magnet is used to magnetize the steel. At… … Wikipedia
materials testing — Introduction measurement of the characteristics and behaviour of such substances as metals, ceramics, or plastics under various conditions. The data thus obtained can be used in specifying the suitability of materials for various… … Universalium
Electromagnetic testing — (ET), as a form of nondestructive testing, is the process of inducing electric currents or magnetic fields or both inside a test object and observing the electromagnetic response. If the test is set up properly, a defect inside the test object… … Wikipedia
Remote field testing — (RFT) is an electromagnetic method of nondestructive testing whose main application is finding defects in steel pipes and tubes. RFT may also referred to as RFEC (remote field eddy current) or RFET (remote field electromagnetic technique). An RFT … Wikipedia
railroad — /rayl rohd /, n. 1. a permanent road laid with rails, commonly in one or more pairs of continuous lines forming a track or tracks, on which locomotives and cars are run for the transportation of passengers, freight, and mail. 2. an entire system… … Universalium